Adjusting The White Balance - Pentax WG-3 GPS Operating Manual

Adjusting the White Balance

You can take pictures in natural colors by adjusting the white balance according
to the light conditions at the time of shooting.
Auto
F
Daylight
G
Shade
l
Tungsten Light
I
Daylight Colors
3
D
J
Fluorescent
Daylight White
N
J
Fluorescent
White Light
W
J
Fluorescent
Manual
K
• Set another white balance if you are not satisfied with the color balance of
pictures taken with the white balance set to F.
• The white balance setting may not be changed depending on the selected
shooting mode. Refer to "Functions Available for Each Shooting Mode"
(p.206) for details.
1
Use the four-way controller (23) to select [White Balance] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
The [White Balance] screen appears.
3
Use the four-way controller (23)
to change the setting.
You can check the results of available white
balance settings on the preview image each
time you press the four-way controller.
92
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Use this mode when taking pictures outside in the shade.
Use this mode when taking pictures under tungsten lamps
or electric lights other than fluorescent.
Use this mode when taking pictures under fluorescent
light.
Use this mode when adjusting the white balance manually.
White Balance
Auto Auto Auto
D
MENU MENU MEN
Cancel Cancel Cancel
OK OK
OK OK OK