Turning The Camera On And Off - Pentax OPTIO M10 Operating Manual

Turning the Camera On and Off

1
1
Press the power switch.
The camera turns on and the LCD monitor turns on.
When you turn the camera on, the lens cover opens and the lens extends.
If the Language Selection screen or Date Adjust screen appears when
you turn the camera on, follow the procedure on p.34 to set the display
language and/or current date and time.
2
Press the power switch again.
The camera and the LCD monitor turn off and the lens closes.
Taking Pictures 1p.57
Checking the Memory Card
The memory card is checked automatically
when the camera turns on. + appears on the
LCD monitor when there is no SD Memory Card
inserted in the camera. In this case, images and
sound files will be saved in the built-in memory.
r appears instead of a when the write-protect
switch on the SD Memory Card is in the locked
position. Images and sound cannot be recorded
when the write-protect switch is locked.
If the batteries have been removed from the camera for a long time, when they
are reinserted and the camera is turned on, the message [Battery depleted] may
appear. This can also happen when using the camera for the first time; however
this is not a malfunction. Wait a minute and then turn the camera on again to
reset the camera. The date and time and other settings may also be reset.
Follow the procedure on p.36 to set these settings again.
32
Power switch
Memory status
03/25/2006 03/25/2006 03/25/2006
14:25 14:25 14:25
38 38 38