Polycom SoundPoint IP30 Series User Manual page 5

In the event that a phone's master config file cannot be found, it will
attempt to download a generic master config file '000000000000.cfg' if it
exists. The generic master config file contains references to 'phone1.cfg'
so this will also be applied to the phone. Here is an example of the default
master config file:
<?xml version="1.0" standalone="yes"?>
<!-- Default Master SIP Configuration File-->
<!-- Edit and rename this file to <Ethernet-address>.cfg for each phone.-->
<!-- $Revision: 1.13 $ $Date: 2004/11/26 23:30:44 $ -->
<APPLICATION APP_FILE_PATH="sip.ld" CONFIG_FILES="phone1.cfg, sip.cfg"
MISC_FILES="" LOG_FILE_DIRECTORY=""/>
Master configuration files contain three XML attributes:
APP_FILE_PATH
CONFIG_FILES
MISC_FILES
Note:
The order of the configuration files listed in CONFIG_FILES is significant.
The files are processed in the order listed (from left to right). The same
parameters may be included in more than one file. The parameter found
first in the list of files will be the one that is effective.
1.1.5.2 Configuration steps for use with Interaction Center
(un-Managed 3.0 stations or pre-3.0 integrations)
The following steps lay out the minimum steps required to use the Polycom
phones as managed SIP stations with the Interaction Center.
1. Set up the FTP server and copy all the template XML files and
application files that came with the Polycom phone into the root
directory of the FTP server. These files include,
sip.ld, 000000000000.cfg, phone1.cfg, sip.cfg, bootrom.ld, bootrom.ver
2. Create per-phone configuration files.
Create per-phone phoneXXXX.cfg and <Ethernet address>.cfg files
•
by using the phone1.cfg and 000000000000.cfg files as templates.
Edit the contents phoneXXXX.cfg as follows,
•
reg.1.displayname="Name displayed in the SIP Messaging"
reg.1.address="User portion of the station's SIP address"
reg.1.label="The button label on the phone"
reg.1.server.1.address="IP address of Interaction Center"
Edit the CONFIG_FILES in the <Ethernet address>.cfg file so that it
•
references the appropriate phoneXXXX.cfg file, that is, replace the
reference to phone1.cfg with phoneXXXX.cfg.
3. Configure the phones to use the FTP server as its boot server.
the path name of the application executable
a comma-separated list of configuration files
a comma-separated list of other required file