Using The Remote Control Unit (Optional) - Pentax Optio 450 Operating Manual

Using the Remote Control Unit (optional)

You can take pictures using the remote control F (optional).
z
Press the
mode to display
monitor.
The self-timer lamp will blink and the camera
is ready to take pictures.
x
Press the shutter release button on
the remote control unit.
The self-timer lamp will blink rapidly and the picture will be taken
after approximately three seconds.
Playing Back Images and Sound
• The buttons on the camera can be used in the same way.
memo
• Please ensure that the remote control unit is no more than 5 meters
away from the front of the camera.
• When taking pictures against the light, the distance at which the
remote control unit operates may be reduced.
• To take a picture immediately after pressing the shutter release
button on the remote control unit, press the
to display
b Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. If the battery needs changing, contact your
nearest Pentax customer service center. (A charge is made for replacing
the battery.)
button in Capture
on the LCD
on the LCD monitor.
z
1/250 1/250 1/250
F2.8 F2.8 F2.8
p.88
button in step
198 198 198
03/20/2003 03/20/2003 03/20/2003
11:19 11:19 11:19
z
77