Changing The Start-Up Screen - Pentax Optio 450 Operating Manual

How to recall the [

Changing the Start-up Screen

You can display an image recorded with the camera as the welcome
screen when the camera is turned on.
z
Select [Start-up Screen] on the [
x
Press the four-way controller ( ).
The Start-up screen will be displayed.
c
Use the four-way controller (
(Off).
v
Press the DPOF button.
b
Use the four-way controller (
you want to display as the start-up screen.
n
Press the OK button three times.
The camera is ready to take or play back images.
Once the start-up screen has been set, it will not be erased even if the
memo
original image is deleted or the SD Memory Card/MultiMediaCard is
formatted. To delete the start-up screen, reset the setting. (
130
Set-up] menu
Four-way controller
OK button
Menu/Fn button
The start-up screen is displayed.
The start-up screen is not displayed.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
Exit
MENU
Set-up] menu.
Change Start-up Screen
Start-up Screen
Exit
MENU DPOF
) to select
) to choose the image
2288 1712
AWB
Wide
Auto
Ok
OK
Image Ok
OK
(On) or
p.137)