Pentax Optio 450 Operating Manual page 112

v
Click the [ACDSee™].
The Setup screen will appear. Follow
the on-screen guidance and enter the
registration information. Reboot your
PC after installation finish.
Installing the ACD photostitcher
If you have installed ACDSee™ and ACD photostitcher in your
computer, you can join the images you have taken in Panorama assist
mode.
Make sure that the ACDSee™ has been installed.
z
Turn on your computer.
x
Insert the CD-ROM (S-SW7) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
b If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW7)] icon.
3) Double click the [Setup.exe] icon.
c
Click your applicable language.
You can choose the language from the following: English, French,
German, Spanish, Italian and Japanese.
v
Click the [ACD Photostitcher].
The Setup screen will appear. Follow
the on-screen guidance and enter the
registration information.
The screen will return to PENTAX
Software Installer. Click the [Exit] to
finish.
110