❷ Introduction To The Projector; Features You'll Enjoy - NEC ME401X User Manual

❷ Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.

Features you'll enjoy:

• Quick start (6 seconds*
6 seconds* after turning on the power, the projector is ready to display PC or video images.
1
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when
projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
* The quick start time is only when [STANDBY MODE] is set to [NETWORK STANDBY] in the on-screen mes-
1
sage.
• 0.23W(100-130 V AC)/0.45W (200-240 V AC) in standby condition with energy saving technology
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that
consumes only 0.23W(100-130 V AC)/0.45W (200-240 V AC).
• Carbon Meter
This feature will show energy-saving effect in terms of CO
MODE] is set to [AUTO ECO], [NORMAL], or [ECO].
The amount of CO
2
in the INFO of the on-screen menu.
• Lamp life up to 9000 hours*
Using in Eco Mode (ECO) allows you to prolong the projector's lamp life up to 9000 hours (up to 4000 hours in
ECO MODE OFF).
• Two HDMI inputs support digital signals
The two HDMI inputs provide HDCP compatible digital signals. The HDMI input also supports audio signal.
• Integrated RJ-45 terminal for wired networking capability along with wireless networking capabilities
An RJ-45 terminal is standard. An optional USB Wireless LAN Unit is required for wireless LAN connection.
• Smart Connection
It enables easily to connect your projector to computers or smartphones, on which the application software, Mul-
tiPresenter, has been installed, by inputting PIN code.
• 20 W built-in speaker for an integrated audio solution
Powerful 20 watt monaural speaker provides volume need for large rooms.
• The supplied remote control allows you to assign a CONTROL ID to the projector
Multiple projectors can be operated separately and independently with the same single remote control by assigning
an ID number to each projector.
• USB Display
Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with
the projector allows you to send your computer screen image to the projector without the need of a traditional
computer cable (VGA).
), Quick Power Off, Direct Power Off
1
emission reduction will be displayed in the confirmation message at the time of power-off and
2
emission reduction (kg) when the projector's [ECO
2
2
1. Introduction