❷ Projecting Images Stored In A Usb Memory Device; Starting The Viewer - NEC ME401X User Manual

❷ Projecting images stored in a USB memory device
This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer toolbar (→ page 51) is set to the factory default.
- Starting the Viewer .......................................................................below
- Removing the USB memory from the projector .......................
- Exiting the Viewer ....................................................................
Preparation: Before starting the Viewer, store images to the USB memory using your computer.

Starting the Viewer

1. Turn on the projector. (→ page 12)
2. Insert the USB memory into the USB port of the projec-
tor.
• Do not remove the USB memory from the projector while
it's LED flashes. Doing so may corrupt the data.
3. Press the SOURCE button on the projector cabinet.
The Viewer start screen will be displayed.
• Press the USB-A button on the remote control.
page 49
page 49
47
4. Using the Viewer