Network Settings - NEC ME401X User Manual

NETWORK SETTINGS

• SETTINGS
PIN
PIN TYPE
PIN CODE
USE PIN CODE AS PASS-
WORD FOR MultiPres-
enter CONNECTIONG
APPLY
WIRED LAN
ENABLE
DISABLE
SETTING
DHCP ON
DHCP OFF
IP ADDRESS
SUBNET MASK
GATEWAY
Select type of PIN code.
ONE-TIME The PIN CODE is automatically created every time powering
ON the projector. Created PIN CODE is kept unchanged until
the projector is powered OFF.
STATIC Enables to set up random number for the PIN CODE.
For the case ONE-TIME is selected as PIN TYPE, automatically created PIN CODE
is displayed on (disabled to input).
For the case STATIC is selected as PIN TYPE, input random 4 digits number as PIN
CODE.
Select if you use the PIN CODE as a security password for connecting to the Multi-
Presenter application. For using the PIN code as a security password, add a check
mark into the square.
□ �������������������������� USE PIN CODE AS PASSWORD FOR CONNECTING TO MultiPresenter�
Make the settings for PIN effective.
Turn on wired LAN connection
Turn off wired LAN connection
Set for wired LAN.
Automatically IP ADDRESS, SUBNET MASK, and GATEWAY are assigned to the
projector by your DHCP server.
Set IP ADDRESS, SUBNET MASK, and GATEWAY to the projector assigned by your
network administrator.
Set your IP ADDRESS of the network connected to the projector.
Set your SUBNET MASK number of the network connected to the projector.
Set the default GATEWAY of the network connected to the projector.
39
3. Convenient Features