HOW TO MOVE THE INDOOR CYCLE WARNING HOW TO ADjusT THE INDOOR CYCLE Due to the weight of the Indoor Cycle, it is recommended The Indoor Cycle can be adjusted for maximum comfort and exercise effectiveness. The instructions below describe one To reduce the risk of injury, use extreme caution that two persons move it.
Page 4
Do not adjust the Do not adjust the saddle position handlebar height beyond the stop beyond the stop marks on the mark on the stem saddle slider Do not adjust saddle height beyond the stop mark on the stem The pedal straps should be adjusted to hold the foot snugly in the pedal .
Page 5
TENsION CONTROL AND EMERGENCY BRAkE ASSEMBLY The preferred level of difficulty in pedaling (resistance) can be regulated in fine increments by use of the tension control knob. To increase the resistance, turn the tension control knob clockwise. To decrease the resistance, turn the knob counter clockwise.
INCLuDED: NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and 1 Console box (S3+ only) partially threaded in before completely tightening any ONE bolt. Adjustable knob 1 Parts box seat post NOTE: A light application of grease may aid in the installation of hardware.
ITEM DESCRIPTION SPECIFICATION and secure with the knob. SHOWN Handlebar Chrome & PVC dipping Note: for assembling S3+ connect the upper and lower Seat Post Chrome handlebar cable before install the handlebar. Pedal (L) Left threaded Pedal (R) Right threaded...
Page 8
Thread the RIGHT pEDAL (4) that has “R” on the spindle to the right side arm of the cycle using the COMBINATION WRENCH (5). Please note that the R pedal is right-hand threaded which needs to be turned counter clockwise to tighten. ( s3 ) ( s3 )
Page 9
TWO ALLEN BOLTs (7) and TWO frame using TWO ALLEN BOLTs (7) and TWO WAsHERs (8), and secure firmly by ALLEN WAsHERs (8), and secure firmly by ALLEN WRENCH (6). WRENCH (6). ( s3 ) ( s3 )
Page 10
( This is CABLE(a) which is preassembled to the lower frame.) Note: Check to see there is no loose cable that could make contact with the flywheel once the cable harness is assembled. ( s3+ ) ( s3+ )
ASSEMBLY COMPLETE! S3 / S3+ Max. User Weight: 130 kg / 286 lbs Product Weight: 43 kg / 95 lbs. ( s3+ ) Overall Dimension: 110 x 47 x 90 cm /43” x 19” x 35”...
Page 12
CONsOLE DIspLAY MONITOR DIspLAY: At the exercise mode, the LCD windows will display RPM, KCAL and ODO. You can press left Key to change the display among TIME/SPEED/CLOCK/DISTANCE LEFT & RIGHT kEY: SHOWN SHOWN a. Press any key to wake up the console from energy saver mode.
COMMON pRODuCT QuEsTIONs TROuBLEs HOOTING ARE THE sOuNDs MY Indoor Cycle MAkEs NORMAL? pROBLEM: The Indoor Cycle makes a squeaking or chirping noise. sOLuTION: Verify the following: Our Indoor Cycles are some of the quietest available because they use belt drives and cantilever brake resistance. We use the •...
EXpLODED VIEW MAINTENANCE The safety level given by the design of the Indoor Cycle can only be maintained when the equipment is regularly examined for damage and wear. Inoperable components should be replaced or the equipment should be put out of use until it is repaired.
Page 16
EXpLODED VIEW s3 & s3+ pARTs LIsT DESCRIPTION DESCRIPTION FLYWHEEL FRMAE FRAME COATED FLYWHEEL ASSEMBLY W/ HUB AND SPROCKET SLEEVE BLACK TRANSMISSION ADJUSTABLE KNOB FOR STEM AND SEAT POST PEDAL ( R ) 9/16" R ALLEN BOLT PEDA ( L ) 9/16"...
Page 17
E: Informaciones para la evacuaciòn CONSOLE Los productos de VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness / LIVESTRONG Fitness SPEED SENSOR son riciclables. Cuando se termina la vida ùtil de un aparato o una màquina, entrèguelos an una impresa local de eleiminaciòn de residuos para su reciclaje.
Need help?
Do you have a question about the S3 and is the answer not in the manual?
Questions and answers