Messages - Pentax Optio 33WR Operating Manual

Messages

The following messages may be displayed on the LCD monitor during
camera operation.
Compression error
Memory card full
Data being recorded
Image folder could not
be created
No image & sound
Camera cannot display
this image
Image protected
Setting being recorded
7
Settings not stored
Alarm was set
Deleting
Battery depleted
Memory card error
Card not formatted
Formatting
No card in camera
Card locked
104
Compression of the image you captured has failed.Change
the recorded pixels or quality level, and take a picture again.
The SD Memory Card / MultiMediaCard memory is full and
no more images or sound can be saved.Insert a new SD
Memory Card / MultiMediaCard or delete unwanted images
or sound.(p.16, 77)
You may be able to save the image by changing the quality
level or recorded pixels.(p.40, 41)
The image/voice recording is being recorded on the SD
Memory Card / MultiMediaCard.
The maximum file number has been used, and no more
images or sound can be saved.Insert a new SD Memory
Card / MultiMediaCard or format the card.(p.16, 90)
There are no images or sound saved in the SD Memory
Card / MultiMediaCard that can be played back.
You are trying to play back an image not supported by this
camera.You may be able to display this on a PC or another
brand of camera.
This is displayed when you try to delete a protected image.
The image/sound protect settings or DPOF settings are
being changed.
The SD Memory Card / MultiMediaCard is full, and no more
DPOF settings can be made.Delete any unwanted images
or sound and try to make the settings again.
This is displayed when the alarm is set and the camera is
about to be automatically turned off.
An images or sound on the SD Memory Card /
MultiMediaCard is being deleted.
The battery is exhausted.Replace the battery.(p.12)
Shooting and playback are impossible due to a problem
with the SD Memory Card / MultiMediaCard.Try displaying
it on a PC.
The SD Memory Card / MultiMediaCard you have inserted
is unformatted or has been formatted on a PC or other
device and is not compatible with the camera.(p.90)
The SD Memory Card / MultiMediaCard is being formatted.
An SD Memory Card / MultiMediaCard has not been
inserted into the camera.(p.16)
The SD Memory Card is write protected. (p.18)