Malfunction Indicator Light; Transaxle Warning Light - Suzuki Ciaz series Owner's Manual

"AIR BAG" Light
This light blinks or comes on for several
seconds when the ignition switch is turned
to the "ON" position or the engine switch is
pressed to change the ignition mode to
"ON" so you can check if the light is work-
ing.
The light will come on and stay on if there
is a problem in the air bag system or the
seat belt pretensioner system.
WARNING
If the "AIR BAG" light does not blink
or come on briefly when the ignition
switch is turned to the "ON" position
or the engine switch is pressed to
change the ignition mode to "ON",
stays on for more than 10 seconds,
or comes on while driving, the air bag
system or the seat belt pretensioner
system may not work properly. Have
both systems inspected by an autho-
rized SUZUKI dealer.

Malfunction Indicator Light

63J030
Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
panel to indicate when it is necessary to
have the emission control system serviced.
The malfunction indicator light comes on
when the ignition switch is turned to the
"ON" position or the engine switch is
pressed to change the ignition mode to
"ON" to let you know the light is working
and goes out when the engine is started.
If the malfunction indicator light comes on
or blinks when the engine is running, there
is a damage in the emission control sys-
tem.
Bring the vehicle to your SUZUKI dealer to
have the damage fixed.
Also, if this light comes on when the
engine is running, there is the problem with
the continuously variable transaxle sys-
tem. Ask your SUZUKI dealer to have the
system inspected.
BEFORE DRIVING
NOTICE
Continuing to drive the vehicle when
the malfunction indicator light is on
or blinking can cause permanent
damage to the vehicle's emission
control system, and can affect fuel
economy and driveability.
65D530

Transaxle Warning Light

(if equipped)
This light comes on for several seconds
when the ignition switch is turned to the
"ON" position or the engine switch is
pressed to change the ignition mode to
"ON" so you can check the light is working.
If this light comes on when the engine is
running, there is a problem with the tran-
saxle system. Ask your SUZUKI dealer to
have the system inspected.
Also, if this light blinks when the engine is
running, the CVT fluid
becomes too high. Stop the vehicle in a
safe place and let the fluid cool down.
80J219
temperature
2-58
79MS0-14E