GERABOX
3
Mechanical converter gearbox
Gear lever
It is installed at the protuberances of the
auto floor. The positions are marked on
the knob.
Synchronization tool
This tool is installed for all four front gears
and gear replacements can be made
easily and without noise providing that do
not put the clutch pedal all the way.
38
Always use the first gear to start the
vehicles; otherwise, the clutch will soon
be abraded .To transfer the gear to the
reverse gear, put the palm of the hand on
the top of the gear handle and move it by
a low pressure to the right side so that the
spring opens up then press it down and
clockwise. For the purpose of not mixing
gears when transferring these gears put
the spring holder at the end of the right
side of the gear.
New position of brake lever
Brake lever position has been transferred
from side part of the cabin to the middle part
( between two chairs) .