Before Putting Into Use; Instructions For Use; We Care For The Environment; Tips For Energy Savings - Minibar Systems SmartFridge Owner's Manual

Before Putting Into Use

Before connecting the appliance to electrical power supply, leave it stand for
about 2 hours, which will reduce the possibility of malfunctions in the cooling
system due to transport handling.
Clean the appliance thoroughly, especially in the interior (see "Cleaning and Maintenance"). In
case the interior accessories are not correctly placed, rearrange them as described in chapter
"Description of the Appliance".

Instructions for Use

These instructions are intended for the user. They describe the appliance and correct operating
procedures for safe use. PLEASE SAVE THESE INSTRUCTIONS.

We Care for the Environment

•
Our products use environmentally friendly packaging. To this end, individual packaging
materials are clearly marked.
•
These instructions are printed either on recycled paper or chlorine free bleached paper.
•
When your appliance finally wears out, please try not to burden the environment with it;
call your nearest authorized service depot (see "Disposing of Worn Out Applicance").

Tips for Energy Savings

•
Do not open the door too often, especially in hot and humid weather. Close the door as
soon as possible.
•
Check appliance ventilation on a regular basis to ensure adequate air circulation behind
the appliance (see "Choosing the Right Place" and "Ventilation Requirements" sections).
•
Before loading the appliance with warm foods, make sure that they are cooled to ambient
temperature.
•
If the gasket is damaged or the door seal is poor, energy consumption is substantially
higher. Replace damaged door gaskets as soon as possible.
•
Ensure the appliance is correctly positioned in the room, away from heat sources and direct
sunlight (see "Choosing the Right Place").
SMARTFRIDGE OWNER'S MANUAL
3
Page