Removing The Camera From The Waterproof Case; Charging Your Camera Using The Microusb Cable; Charging Your Battery Using An Optional External Charger - SJCAM SJ5000X User Manual

Removing the camera from
the Waterproof Case
1
3
Clasp Release
Remove the camera from the
waterproof case by sliding the lock
on top ( ), then lifting the clasp by
1
following the steps shown above
( & ).
2 3
When the backdoor is free, pull the
camera out of the waterproof case.
Charging your camera using
the MicroUSB cable.
2
MicroUSB Cable
Plug the MicroUSB cable to the slot
on the side of the camera as
indicated above, and the other end
to a USB wall charger with an output
of 5V 1A, or plug it to a computer.
Charging your battery using
an optional external charger.
USB
Optionally, remove your battery by
sliding the lock at the bottom of the
camera to release the compartment
door. Pull the battery out by the ap,
then plug it to the External Battery
Charger Accessory (sold separately).