Warranty Conditions - Latronics PV Edge Grid Connect Instruction Manual

MC4 CONNECTOR WIRING
The inverter comes with two MC4 connectors panel mounted on the case. To
assemble the connecting partner, take a male and female MC4 connector and
follow the instructions below.
1. Strip back 10mm of cable (Recommended Cable: 6sqmm or bigger).
2. Check correct cable is partnered to correct connector. Insert the stripped
cable into the metal insert and crimp shut.
3. Solder the crimped cable to the metal insert to ensure a solid connection.
4. Unscrew the pressure ring and insert the cable through.
5. Push cable into main body until clipped in.
Pressure Ring
6. Repeat procedure for the other connector.
Pressure Ring
Handy Hint: MC4 connectors are purchasable in short male to female links,
which can be cut in half and used to save time.
Crimp Shut and solder
Do not disconnect
under load
Do not disconnect
under load
4

WARRANTY CONDITIONS

All conditions and warranties expressed or implied by stature, common law,
equity, trade, custom, usage, or otherwise howsoever are hereby expressly
excluded to the maximum extent permitted by law. Where so permitted the
liability of Latronics for a breach of condition or warranty that cannot be
excluded is limited (at Latronics option) to the replacement or repair of the
goods or of acquiring equivalent goods or the cost of replacing or repairing the
goods or of acquiring equivalent goods. Latronics shall not be liable in any way
whatsoever for indirect or consequential loss or damage whatsoever (whether
based on tort or contract or otherwise)
Damage caused by unauthorised repair, alteration or substitution of non-
!
standard parts, incorrect installation, misuse, negligence, accident or
similar cause, or usage other than in accordance with the operating
instructions, is not covered under warranty.
Unauthorised opening of the goods will render the Warranty invalid.
!
The company may, at its discretion, agree to act as agent for the owner
!
where delivery is requested and all costs for cartage and insurance will
be for the owners account . All warranty work is ex-factory.
The replacement of any part or labour involved will not have the effect of
!
extending the period of the warranty of the goods.
Any faulty part replaced under Warranty becomes the property of the
!
Company for purposed of examination and claim under proprietary
Warranty.
Registration Card must be returned within 30 days from date of purchase
!
to validate your warranty.
Keep your receipt as proof of purchase, should any difficulties arise
!
concerning the return of the registration card.
Inverters are supplied by the manufacturer, or the manufactures agents,
!
under the express condition that no responsibility is implied or accepted
by the above parties for any damage to any appliance, equipment or
property associated with the correct or otherwise operation of the
Inverter.
If service is required contact your local supplier/installer, or contact
!
Latronics direct. Please ensure that you have completed the warranty
repair form on page 18 to enable prompt processing.
17