2-1. Driving procedures
Turn signal lever
Turn signals can be operated when
■
The "POWER" switch is in ON mode.
If the indicators flash faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
156
GS_HV_U (OM30C14U)
May 21, 2010 2:41 pm
Right turn
Left turn
Move and hold the lever part-
way to signal a lane change
The right hand signal will flash
until you release the lever.
Move and hold the lever part-
way to signal a lane change
The left hand signal will flash
until you release the lever.