Lexus GS 450h2011 Manual page 464

4-3. Do-it-yourself maintenance
Engine oil consumption
■
The amount of engine oil consumed depends on the oil viscosity, the quality of
●
the oil and the way the vehicle is driven.
More oil is consumed under driving conditions such as high speeds, frequent
●
acceleration and deceleration.
A new engine consumes more oil.
●
When judging the amount of oil consumption, keep in mind that the oil may
●
have become diluted, making it difficult to judge the true level accurately.
Oil consumption: Max. 1.1 qt./600 miles, 0. 9 Imp.qt./600 miles (1.0 L per 1000
●
km). If the vehicle consumes more than this amount, contact your Lexus dealer.
Resetting the engine oil maintenance data (U.S.A. only)
■
Perform the following steps:
Press the "DISP" switch (P. 167) to change the multi-information display
STEP 1
to blank.
Turn the "POWER" switch to OFF.
STEP 2
Turn the "POWER" switch to ON mode with the trip meter reset button
STEP 3
held down.
Keep pressing the button for longer than 7 seconds after the "POWER"
STEP 4
switch is in ON mode.
464
GS_HV_U (OM30C14U)
September 18, 2015 8:32 am
After the above operation, the message
shown in the left will appear on the display.
The master warning light and tone will turn
on. After 5 seconds, the system reset is com-
pleted.