Lexus GS 450h2011 Manual page 611

Tire related term
Innerliner
Innerliner separation
Intended outboard side-
wall
Light truck (LT) tire
Load rating
Maximum load rating
Maximum permissible
inflation pressure
Measuring rim
Open splice
Outer diameter
GS_HV_U (OM30C14U)
May 21, 2010 2:41 pm
Meaning
The layer(s) forming the inside surface of a tubeless
tire that contains the inflating medium within the tire
The parting of the innerliner from cord material in the
carcass
(a) The sidewall that contains a whitewall, bears white
lettering, or bears manufacturer, brand, and/or
model name molding that is higher or deeper
than the same molding on the other sidewall of
the tire, or
(b) The outward facing sidewall of asymmetrical tire
that has a particular side that must always face
outward when mounted on a vehicle
A tire designated by its manufacturer as primarily
intended for use on lightweight trucks or multipur-
pose passenger vehicles
The maximum load that a tire is rated to carry for a
given inflation pressure
The load rating for a tire at the maximum permissible
inflation pressure for that tire
The maximum cold inflation pressure to which a tire
may be inflated
The rim on which a tire is fitted for physical dimension
requirements
Any parting at any junction of tread, sidewall, or
innerliner that extends to cord material
The overall diameter of an inflated new tire
6-1. Specifications
6
611