2-1. Driving procedures
Power (ignition) switch
Performing the following operations when carrying the electronic key on
your person starts the hybrid system or changes "POWER" switch modes.
■
Starting the hybrid system
Check that the parking brake is set.
STEP
1
Check that the shift lever is set in "P".
STEP
2
Sit in the driver' s seat and firmly depress the brake pedal.
STEP
3
The "POWER" switch indicator turns green.
STEP
4
148
GS_HV_U (OM30C14U)
May 21, 2010 2:41 pm
Press the "POWER" switch.
After a few seconds, the
"READY" light will flash and
come on with a beep sound.
The vehicle can move when the
"READY" light is on, even if the
engine is stopped.
The hybrid system can be
started from any mode.