Image EBRTL39515.0 User Manual page 9

3. Identify the Right Upright (76). Have a second
person hold the Right Upright near the Base
(74).
See the inset drawing. Tie the wire tie in the
Right Upright (76) securely around the end of the
Upright Wire (63). Then, insert the Upright Wire
into the lower end of the Right Upright as you
pull the other end of the wire tie out of the top of
the Right Upright.
4. Lay the Right Upright (76) near the Base (74) as
shown. Attach the ground wire to the Base with a
#8 x 1/2" Ground Screw (1).
Then, press the Upright Grommet (73) into the
square hole in the Right Upright (76).
3
Wire
63
Tie
76
74
4
9
63
Wire
Tie
76
74
1
76
73
Square
Ground
Hole
Wire