Table of Contents
Advertisement
9. Attach the Console Crossbar (61) to the Left
and Right Uprights (66, 76) with four #10 x 3/4"
Screws (8) and four #10 Star Washers (23);
start all four Screws, and then tighten them.
Then, firmly tighten the two 5/16" x 3/4" Screws
(5) and the two 5/16" x 3" Screws (7).
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (64).
See the inset drawing. Connect the Upright
Wire (63) to the console wire. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
Then, connect the console wire to the ground
wire on the Console Crossbar (61).
9
8
23
7
5
66
10
Console
Assembly
Console
Wire
63
Wire
64
Tie
12
61
8
23
7
76
5
Ground
Wires
61
Console
Wire
63
Hide quick links:
Advertisement
Table of Contents
