Paper Source Selection - Ricoh B230 Service Manual

Related SP Modes
Job spooling can be turned on and off using the SP mode (SP5-828-069) for each protocol.
The machine does not spool jobs when job spooling is switched off with the SP mode, even
when the customer switches it on with the user mode.

Paper Source Selection

Tray Priority (Auto Tray Select)
The "Tray Priority" setting determines the start of the tray search when the user selects
"Auto Tray Select" with the driver. The machine searches paper trays for the specified
paper size and type.
When no tray contains paper that matches the paper size and type specified by the driver,
the controller stops printing until the user loads the correct paper.
The "Tray Priority" setting can be specified in the following menu: > System Settings
> Tray Paper Settings > Paper Tray Priority: Printer.
The by-pass feed table is not part of the tray search.
Tray Locking
If "Tray Locking" is enabled for a tray, the controller skips the "locked" tray in the tray search
process.
The "Tray Locking" setting can be specified in the following menu: > System Settings
> Tray Paper Settings > Paper Type: Tray # > Apply Auto Paper Select (where the "#"
indicates the tray number).
The by-pass feed table cannot be unlocked (Tray Locking is always enabled).
Manual Tray Select
If the selected tray does not have the paper size and type specified by the driver, the
B230/B237/D042 6-84 SM