Test Pattern Printing - Ricoh B230 Service Manual

Staple Slide Pulse
6146 4
Motor
Stuck Exit Pulse
6146 5
Motor
Pick Roller Pluse
6146 6
Motor
6146 7 Staple DC Motor
Paper Tray Lift DC
6146 8
Motor
Paper Detection
6146 9
SOL
Paddle Rotation
6146 10
SOL
6146 11 Belt SOL

5.2.4 TEST PATTERN PRINTING

Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used
primarily for design testing.
Do not operate the machine until the test pattern is printed out completely.
Otherwise, an SC occurs.
1. Enter the SP mode and select SP2-109-003.
2. Enter the number for the test pattern that you want to print and press [#].
3. When you want to select the single color of Magenta, Yellow or Cyan for printing a test
pattern, select the color with SP2-109-005 (2: Magenta, 3: Yellow, 4: Cyan).
4. When you want to change the density of printing a test pattern, select the density with
SP2-109-006 to -009 for each color.
If you select "0" with SP2-109-006 to -009, the color to be adjusted to "0" does
not come up on a test pattern.
SM
Stapler Unit Movement Motor
Paper Reverse/Exit Motor
Pick-Up Roller Contact Motor
Staple Unit Motor
Output tray motor
Stack Height Lever Solenoid
Paddle Roller Solenoid
Belt Lift Solenoid
5-393 B230/B237/D042