Advertisement
Mode and Action
Adding Special (5-Digit) PIN-codes
The PIN-code entered activates only the
Relay specified as the 5
code.
In Run Mode press the "ADD" Push-
1.
button for less than 1 second.
Press the "TENS" and "UNITS" Push-
2.
buttons until the desired Tag Location is
shown.
3.
Enter your 4-digit PIN-code on the
Keypad Antenna Reader, followed by a
1-digit reference to the Relay you want to
activate. Press the "#" Key on the
Keypad Antenna Reader to complete the
entry.
Press "ADD" to return to Run Mode.
4.
NOTE: Ensure you enter the complete
5-digit code, followed by the "#" Key
to gain entry.
Deleting Tags or PIN-codes
In Run Mode press the "DELETE" Push-
1.
button.
Press the "TENS" and "UNITS" Push-
2.
buttons until the desired Tag Location is
shown.
Press "DELETE" to delete the desired
3.
Location.
4.
Specify more Locations to be deleted, or
press "DELETE" to return to Run Mode.
Bulk Delete
1.
Power down the SupaGate.
2.
Power up the SupaGate while
simultaneously pressing the "ADD" and
"DELETE" Push-buttons.
"??" is displayed, after 2 seconds all is
3.
deleted and "dE" is displayed.
SGI300-0-0-GB-08
th
digit of the PIN-
April 2008
7-Segment Display LED
Displays
Displays the first free
Location (01-99)
Displays the PIN-code
as follows:
Display
Duration
1 second
2 seconds
1 second
2 seconds
Page 9
Advertisement
