Advertisement
Mode and Action
Adding RF Tags
In Run Mode press the "ADD" Push-
1.
button for less than 1 second.
Press the "TENS" and "UNITS" Push-
2.
buttons until the desired Tag Location is
shown.
3.
Press only the Buttons on the ImproX
(QT) Quad Transmitter that are required
to be allowed.
Press "ADD" to return to Run Mode.
4.
NOTES:
Each new Tag Code received will display
the Location at which it is being added.
If the Tag already exists, it will be
deleted and re-added in the same
location.
Adding Normal (4-Digit) PIN-codes
In Run Mode press the "ADD" Push-
1.
button for less than 1 second.
Press the "TENS" and "UNITS" Push-
2.
buttons until the desired Tag Location is
shown.
3.
Enter your 4-digit PIN-code on the
Keypad Antenna Reader, followed by the
"#" Key on the Keypad Antenna Reader.
Press "ADD" to return to Run Mode.
4.
NOTE: Ensure you enter the complete 4-
digit code, followed by the "#" Key to
gain entry.
SGI300-0-0-GB-08
Displays the first free
Location (01-99)
Displays the Button
Number as follows:
Displays the first free
Location (01-99)
Displays the PIN-code
Blank Space
April 2008
7-Segment Display LED
Displays
as follows:
Display
Duration
1 second
2 seconds
1 second
2 seconds
Page 8
Advertisement
