Advertisement
USER INFORMATION
Mode and Action
POWER-UP
RUN MODE
Reading Tags
Unknown Tag
Tag Found
PROGRAMMING MODE
Adding Passive Tags
In Run Mode press the "ADD" Push-
1.
button for less than 1 second.
Press the "TENS" and "UNITS" Push-
2.
buttons until the desired Tag Location is
shown.
3.
Present the Passive Tag to the Antenna
Reader.
Press "ADD" to return to Run Mode.
4.
NOTES:
Each new Tag Code received will display
the Location at which it is being added.
If the Tag already exists, it will be deleted
and re-added in the same location.
SGI300-0-0-GB-08
Displays the Tag
Memory Location
Displays the first free
Location (01-99)
Displays the Passive
Tag (Card) number as
Blank Space
April 2008
7-Segment Display LED
Displays
(01-99)
follows:
Display
Duration
2 seconds
then enters
Run Mode
Rotates in
a circular
manner
2 seconds
2 seconds
1 second
2 seconds
Page 7
Advertisement
