Table of Contents
Advertisement
Using your Stereo DAB/FM Radio
Let's get started
Setting the alarm
Note: Check that the radio has the correct time and date before you set an alarm.
1. Press and release the Alarm button.
2. Alarm 1 Setup is displayed (Press and release the Alarm button again to set Alarm 2).
Press and release the Tune/Select control.
3. Alarm 1 Wizard On time is displayed and the hour digits for the alarm will flash.
4. Use the Tune/Select control to scroll to the hour for the alarm and press to Select.
5. The minutes will now flash. Use the Tune/Select control to scroll to the minutes for
the alarm and press to Select. The duration time will now flash.
6. Use the Tune/Select control to scroll to the duration for the alarm and press to Select.
You can choose from 15, 30, 45, 60, 90 and 120 minutes. Press the Tune/Select
control to Select. The source for the alarm will now flash.
7. Use the Tune/Select control to scroll to the sound source for the alarm. You can
choose from Buzzer, DAB or FM. Press to Select.
Note: If you select DAB or FM radio for the alarm source, 'Last listened' will flash in the
display. Press and release the Tune/Select control and the last listened to radio station
in DAB or FM, as appropriate, will be used for your alarm.
8. Use the Tune/Select control to scroll to the frequency for the alarm. You can choose
from Daily, Once, Weekends or Weekdays. Press to Select.
Note: If you select 'Once' , you will then be prompted to set the date for your alarm.
9. Use the Tune/Select control to choose Alarm On or Off and press to Select. Alarm
Saved is displayed.
10. A bell icon will appear in the standby radio display, together with a '1' or '2' as
appropriate, to confirm that an alarm has been set.
30
Using your Stereo DAB/FM Radio
Using your Stereo DAB/FM Radio
Let's get started
Note: If the time is not set or has failed to update from the radio signal, Time is not set
will be displayed when you try to set the alarm. The radio will then prompt you to set
the time. An alarm can only be set after the time has been set.
Stop the Alarm
When the alarm sounds, press and release the Power button, Alarm off will be displayed.
Alternatively, you can press and release the Snooze button (see Snooze function below).
Note: When you press a button to stop the alarm, the alarm symbol will remain in the
display and the alarm will sound again at the same time the next day, unless it was set
for 'Once' only.
Snooze
When the alarm sounds you can press and release the Snooze button. Snooze will be
displayed, followed by the snooze time countdown from 9 minutes, until the alarm
sounds again.
Turn off the Alarm
Follow the steps for 'Setting an Alarm' and select 'Off' in step 9.
Sleep timer
You can set your radio to switch to Standby mode automatically using the sleep timer. You
can choose from Sleep off, 15, 30, 45, 60 and 90 minutes.
With your radio switched on (not in Standby mode):
1. Press and release the Menu button to enter the menu options.
2. Use the Tune/Select control to scroll to <System>. Press to Select.
3. Use the Tune/Select control to scroll to <Sleep>. Press to Select.
4. Use the Tune/Select control to scroll through the available options. Stop when the
sleep time you would like is displayed and press to Select. <Sleep> will be displayed.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
31
Using your Stereo DAB/FM Radio
Hide quick links:
Advertisement
Table of Contents
