Toyota FJ cruiser 2013 Owner's Manual page 357

Training an entry gate (for U.S. owners)/Training a device in
■
the Canadian market
Place the remote control transmitter 1 to 3 in. (25 to 75 mm)
away from the HomeLink
Keep the HomeLink
Press and hold the selected HomeLink
Repeatedly press and release (cycle) one of the buttons on
the remote control transmitter for 2 seconds at a time until
is completed.
When the HomeLink
release the buttons on the HomeLink
Test the HomeLink
button. Check to see if the gate/device operates correctly.
Repeat the steps above to train another device for any of the
remaining HomeLink
Training other devices
■
To train other devices such as home security systems, home door
locks and lighting, contact your Toyota dealer for assistance.
Retraining a button
■
The individual HomeLink
retrained. To retrain a button, follow the "Retraining a HomeLink
button" instructions.
®
buttons
®
indicator light in view while training.
®
indicator light starts to flash rapidly,
®
operation by pressing the newly trained
®
buttons.
®
buttons cannot be erased but can be
3-7. Other interior features
®
button.
®
.
3
®
381