2-4. Using other driving systems
Canceling and resuming the constant speed control
■
Cruise control can be set when
■
Vehicles with an automatic transmission: The shift lever is in the D or
●
range 4.
Vehicle speed is above approximately 25 mph (40 km/h).
●
Accelerating after setting the vehicle speed
■
The vehicle can be accelerated normally. After acceleration, the set
●
speed resumes.
Even without canceling the cruise control, the set speed can be
●
increased by first accelerating the vehicle to the desired speed and then
pushing the lever down to set the new speed.
156
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also can-
celed when the brakes are
applied or the clutch pedal
(manual transmission only) is
depressed.
Pushing
the
resumes
the
speed control.
Resuming is available when
the vehicle speed is more than
approximately 25 mph (40
km/h).
lever
up
constant
Need help?
Do you have a question about the FJ cruiser 2013 and is the answer not in the manual?