2-3. Operating the lights and wipers
Daytime running light system
■
To make your vehicle more visible to other drivers, the headlights turn on
●
automatically (at a reduced intensity) whenever the engine is started and
the parking brake is released. Daytime running lights are not designed for
use at night.
Compared to turning on the headlights, the daytime running light system
●
offers greater durability and consumes less electricity, so it can help
improve fuel economy.
Automatic light off system
■
When the headlights come on: The headlights and tail lights turn off 30
●
seconds after all doors and glass hatch are closed with the engine switch
turned to the ACC or LOCK position. (The lights turn off immediately if
the LOCK button on the wireless remote control is pressed twice after all
doors are locked.)
When only the tail lights come on: The tail lights turn off automatically
●
with the engine switch turned to the ACC or LOCK position and the
driver's door is opened.
If the driver's door is kept open, the lights automatically turn off after 30 min-
utes.
To turn the lights on again, turn the engine switch to the ON position, or turn
the headlight switch off once and then back to the
Customization that can be configured at Toyota dealer
■
Settings (automatic light off system) can be changed.
(Customizable features →P. 535)
NOTICE
To prevent battery discharge
■
Do not leave the lights on longer than necessary when the engine is not run-
ning.
150
or
position.
Need help?
Do you have a question about the FJ cruiser 2013 and is the answer not in the manual?