Huawei eSpace EGW1500E Quick Start Manual page 22

eSpace EGW1500E Enterprise Gateway
Quick Start
Parameter
Digitmap
User State
----End
Configuring an IP Phone
Set the IP phone's IP address, SIP user's internal number, and IP address of the SIP server
(EGW1500) to register the IP phone with the EGW1500E. For details, see related IP phone
manuals.
If you do not use an IP phone, skip this procedure.
Verification
If the call fails, verify that the preceding configuration is correct.
Issue 03 (2011-12-20)
Description
A dialing rule, which determines whether the range and length of the
dialed number comply with the dialing rule. This parameter is valid after
you set the Registration Group parameter. The EGW1500E allows users
to dial numbers that are defined in the digitmap to make calls quickly. If
the dialed number length is the same as that defined in the digitmap, the
EGW1500E stops collecting digits and initiates the call, which reduces the
connection duration. Use the default settings. To customize the settings,
see the eSpace EGW1500E Enterprise Gateway Product Documentation.
User status.
Verify internal numbers.
Use the analog phone and IP phone to call each other by dialing internal numbers.
Verify external numbers.
Use an analog or IP phone and a mobile phone to call each other.
−
Use the analog phone and IP phone to call each other by dialing external numbers.
−
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Product Function Configuration
19