Table of Contents
Advertisement
eSpace EGW1500E Enterprise Gateway
Quick Start
Table 3-10 Parameter description (3)
Parameter
Internal No
User Name
Authenticatio
n
Password
Registration
Group
External No
Digitmap
User State
IP Address
----End
Add POTS users
Step 1 On the web management page, choose Voice > Phone Allocation from the navigation tree.
Click the POTS User tab page.
Step 2 Click
Issue 03 (2011-12-20)
Description
The internal number is used for the calls between intra-office
subscribers.1-30 digit number, which can be user-defined. It cannot
conflict with any service prefixes, emergency numbers, outer-office
numbers, or other intra-office numbers.
A string of 1-64 characters, which can be user-defined. For example, Jack.
Authentication mode used when a SIP user registers with the EGW1500E.
The value must be the same as that set on the SIP terminal.
Authentication password used when a SIP user registers with the
EGW1500E. The value must be the same as that set on the SIP terminal.
Registration group used when a SIP user registers with the IMS or NGN.
NOTE
If the required registration group does not exist, choose Voice > SIP Server, and
click the SIP Group tab to add it.
External number of the user, which is used for outgoing and incoming
calls. It is provided by the carrier. This parameter is valid after you set the
Registration Group parameter. The external number cannot conflict with
any service prefixes, emergency numbers, outer-office numbers, or other
intra-office numbers.
NOTE
Registration Group bound to External No must correspond to Sip Trunk ID. If
Sip Trunk ID starts with +, you need to change + to 00 when you configure
External No.
A dialing rule, which determines whether the range and length of the
dialed number comply with the dialing rule. This parameter is valid after
you set the Registration Group parameter. The EGW1500E allows users
to dial numbers that are defined in the digitmap to make calls quickly. If
the dialed number length is the same as that defined in the digitmap, the
EGW1500E stops collecting digits and initiates the call, which reduces the
connection duration. Use the default settings. To customize the settings,
see the eSpace EGW1500E Enterprise Gateway Product Documentation.
User status.
IP address of the IP phone on the LAN.
.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Product Function Configuration
17
Advertisement
Table of Contents
