Table of Contents
Advertisement
eSpace EGW1500E Enterprise Gateway
Quick Start
Parameter
Address Type
IP/Domain
DNS Type
Server Type
Port
Expiration
Time
----End
Configure a registration group
Step 1 On the web management page, choose Voice > SIP Server from the navigation tree.
Step 2 Click
Figure 3-7 SIP Group tab page
Step 3 Perform configurations according to
Issue 03 (2011-12-20)
Description
Address type. The options are IP and Domain.
IP address or DNS domain name of the SIP server. The value is provided
by the network carrier.
Mode for the DNS server to parse the IP address. This parameter is valid
when Address Type is set to Domain.
SRV: Two IP addresses are parsed from one the domain name parsing.
One IP address functions as the IP address of the active server, and the
other functions as the IP address of the standby server.
NOTE
If you set DNS Type to SRV, you do not need to configure the slave SIP server.
HOST: One domain name corresponds to one IP address. To perform
switchover between the active and standby servers, two SIP servers
need to be configured.
SIP network type,The value is provided by the network carrier.
Port number of the SIP server. The value is provided by the network
carrier. The default value 5060 is recommended.
Timeout duration for the registration group to register with the SIP
server. The value ranges from 0 to 14400, in seconds. The default value
360 is recommended.
.
Table
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Product Function Configuration
3-9. Click
to save the settings.
15
Advertisement
Table of Contents
