Annual Servicing; Hydraulic Unit; Positioning The Electrodes - Baxi luna platinum+ Instruction Manual

20. ANNUAL SERVICING

Check the appearance and airtightness of the gaskets of the gas and combustion circuits;
Check for any impurities inside the combustion chamber. Use a vacuum cleaner to do this;
Check the gas valve is correctly calibrated;
Check the pressure of the heating system;
Check the pressure of the expansion vessel;
Check for any impurities inside the siphon (for condensation boilers);

20.1 HYDRAULIC UNIT

KEY TO HYDRAULIC UNIT - "SECTION" G
A
B
Boiler/system drain tap
C
C-1 C-2
( & : access to tap C
D
E DHW temperature NTC probe
F
20.1.1 CLEANING THE COLD WATER FILTER
Remove the nut on the DHW priority sensor unit
Remove any impurities.

20.2 POSITIONING THE ELECTRODES

20 °F
53
B
CG_2190
7219836.01 (1-04/15)