Intertek ACVC96 Service Instructions Manual page 10

PRODUCT IDENTIFICATION
MODEL # MFG #
N/A
EFR02
N/A
HASFK-1
N/A
LPLP03
LPM-08 N/A
10
External Filter Rack Kit. For use with Goodman® and Amana® Brand 90% upflow variable
speed gas furnace models. This kit is intended to provide a location, external to the furnace
casing, for installation of a permanent filter. The rack is mounted over the indoor air blower
compartment area of either side panel, and provide filter retention as well as a location for
attaching return air ductwork.
High Altitude Natural Gas Kit. Used on selected Goodman® Brand and Amana® Brand 90% two
stage furnace models. These kits are required when installing the furnaces above their
maximum rated altitude. The orifices in the kit have been selected as a result of testing with the
American Gas Association. They will provide appropriate derating at the altitude listed in the
High Altitude Charts as shown in the installations of the kit.
LP Gas Low Pressure Kit. Designed for application on Goodman® and Amana® Brand's gas
furnace products installed on LP gas listed in this manual. This kit includes harness adaptors to
work with White-Rodgers single & two stage gas valves,Honeywell single and two-stage gas
valves, as well as modulating gas valves.
LP Conversion Kit. For use with Goodman® and Amana® Brand 34.5" 2-stage variable speed
models using a White-Rodgers 36J54,, 2-stage gas valve kit. Includes regulator springs,
1.25mm orifices, instructions and a label to show the furnace has been converted to L.P.
DESCRIPTION