Care And Maintenance - Kärcher 750mx Manual

5. CARE AND MAINTENANCE

To ensure the prolonged life and troublefree use of your
Karcher Pressure Washer we strongly recommend
routine maintenance of the following:
Spray lance with Pressure Regulator (No.17)
Visually check to see if the nozzle has any dirt or grit, if so,
remove the dirt from the nozzle hole with a needle and rinse
with water from the front.
Water Connection (No.8)
After every 50 or so periods of operation, remove the filter fitted to
the inlet of the Pressure Washer with flat nosed pliers and check
that there are no obstructions - if any are present rinse clean.
Detergent Suction Tube (No.10)
Clean the filter.
IMPORTANT
1. REMEMBER FROST WILL DAMAGE YOUR KARCHER
PRESSURE WASHER IF IT HAS NOT BEEN
COMPLETELY EMPTIED OF WATER AFTER USE.
ALWAYS STORE IN A FROST FREE AREA.
FROST DAMAGE IS NOT COVERED BY WARRANTY.
2.The high pressure hose of your Karcher Pressure Washer
should not be mistreated. It is designed to withstand high
pressure operation but if the wall of the hose is damaged it
may balloon and burst during use, especially if vehicles are
run over it or it is pulled across sharp or abrasive edges.
IT IS THE SECOND MOST EXPENSIVE ELEMENT OF YOUR
PRESSURE WASHER - PLEASE TAKE CARE OF IT.
13