High Pressure Operation; High Pressure Operation With Dertergent - Kärcher 750mx Manual

4.1 High Pressure Operation

• Switch on the pressure washer (No.4)
• Ensure the Spray Lance with the Pressure Regulator (No.17) is attached
securely to the Clean Gun (No.12) and the nozzle is set to the required
setting (+).
• Aim the lance towards the object to be cleaned making sure the
recommended working distance is used (for reference see Page 9).
Release the Safety Lock Device (No.14) on the Clean Gun and
squeeze the lever.
The pressurised water jet alone is capable of fulfiling most
cleaning tasks around the garden or on building work but
detergent and wash brush are advantageous when cleaning
vehicles or other paint finishes.
4.2 High Pressure Operation with Detergent
• Fill Detergent Chamber (13)
with Clean Stick.
• Set the Detergent Dosing Ring
to the desired dosage.
• Ensure the Spray Lance with the
Pressure Regulator (No.17) is
attached securely to the Clean
Gun (No.12) and the nozzle is set to the required setting (+).
• Switch on the pressure washer (No.4)
• Aim the nozzle towards the object to be cleaned making sure the
recommended working distance is used (for reference see Page 9).
Release the Safety Locking Device on the Clean Gun and squeeze
the lever to apply the detergent to the working area.
• To rinse the detergent away. Take out used Clean Stick from Deter-
gent Chamber (dry and store for further use). Spray with the required
jet spray setting until no trace of detergent can be found.
10