Getting Started; Menu Structure (Handset) - GE 22437 User Manual

Connecting the Charging Station
Insert the power plug in the socket on the rear side of the charging
station. Insert the power plug at the other end in the power outlet. The
charging station is now ready to operate.
CAUTION:
Use only the Thomson power supply that came with this unit. Using
other power supplies may damage the unit.
#
This feature is only applicable with more than one handset

Getting Started

Install and Charge the Batteries
Insert two pieces AAA batteries in the compartment, ensuring correct
polarity and close the compartment.
Place the handset in the base station to charge for 16 hours prior
for first use. If you don't properly charge the phone, battery
performance will be compromised.
Warning: The handset does not work and damaged if the wrong
batteries are inserted.
Features
We are very pleased that you have purchased this highly sophisticated,
cordless telephone which is equipped with the following features:
Digital cordless telephone complying to DECT* standards
Operation instruction in 3 languages
Teleconference
Call forwarding
Internal, free communication between handsets
Automatic call answering on/off
Call log function with caller list for 30 numbers or names
(network dependent)
DOT MATRIX LCD display
Phone book for 50 entries with name and call number
Extended redialing for 10 call numbers
Microphone muting function
Acoustic battery and range warning signals
Key lock
Key input tone on/off
8 incoming call ringing melodies
Ringing volume control (5 levels and silent)
Tone/Pulse dialing
Operation of up to 4 handsets
Paging function from base station to handset
Up to 100 hours standby
Up to 10 hours continuous call time
Operation with 2 standard AAA batteries (Ni-MH)
Adjustable flash time
*DECT = Digital Enhanced Cordless Telecommunication=Standard
for Cordless Telephone.

Menu Structure (Handset)

#
– 4 –