GE Masoneilan SVi 1000 Instruction Manual page 11

1. Select the Full Wizard tab and ensure the mode is in Setup.
2. Set the Current Slot to either 0 for ATO or 8 for ATC.
3. Click an item in the Procedure Name list or click Check All.
© 2016 General Electric Company. All rights reserved.
Figure 9 Full Wizard Tab
This procedure moves the valve.
Procedures (e.g. Find Stops, Auto Tune, Step Test and Ramp Test)
should NOT be invoked if the ValVue sequencer is running.
Masoneilan SVi1000 Bench Quick Start Manual
| 11
=