Advanced Configuration; User Configuration - Navaio NGC-7225V User Manual

Network Camera User Manual

4.5 Advanced Configuration

Advanced configuration includes five submenus: User Configuration, Security Configuration,
Configure Backup & Restore, Reboot and Upgrade.

4.5.1 User Configuration

Go to Advanced configurationUser Configuration interface.
Add user:
1. Clicking "Add" button pops up "Add user" dialog box.
Note: After binding physical address to the IP-CAM, you can access the device on this PC in
network only. If the MAC address is "00:00:00:00:00:00", it means the camera can be
connected to any computers.
2. Input user name in "User Name" textbox (only letters).
3. Input characters in "Password" and "Confirm Password" textbox (letters or numbers).
4. Input the MAC address of the PC in "Binding MAC address" textbox.
5. Click "OK" button and then the new added user will display in the user list.
Modify user:
1. Select the user which needs to modify password and physical address in the user
configuration list box.
2. Clicking "Modify" button will pop up "Modify user" dialog box as shown below.
User Configuration
Parameter
Server name The name of the FTP server
The address of the FTP server
Server address
The port number of the FTP server
Port
User name The user name of the FTP server
The password of the FTP server
Password
The save path for FTP files
Path
23
Meaning
Add User