Server Configuration; Ip Notify; Ddns Configuration - Navaio NGC-7225V User Manual

Network Camera User Manual

4.4.3 Server Configuration

Go to "Network Configuration" "Server Config".
1. Check "Do you want IP Camera to connect Server".
2. Check the IP address and port of the transfer media server in the CMS/NVMS. Then enable
the auto report in the CMS/NVMS when adding a new device. Next, self-define the device ID
and input the remaining information of the device in the CMS/NVMS.
3. Input the above-mentioned server IP, server port and device ID in the responding boxes.
4. Click "Save" button to save the settings.

4.4.4 IP Notify

1. Go to "Network Configuration" "IP Notify" to see a tab as shown below.
2. If the "Enable notifying change of IP" is selected, when the IP address of the device is
changed, a new IP address will be sent to the appointed mailbox automatically; If "FTP" is
selected, when the IP address of the device was changed, a new IP address will be sent to FTP
server.

4.4.5 DDNS Configuration

1. Go to "Network Configuration"  "DDNS Configuration" tab as shown below.
19