Port; Ip Address - Navaio NGC-7225V User Manual

Network Camera User Manual

4.4.1 Port

1. Go to "Network config" "Port" to see the interface as shown below.
2. Input port number for IE access in the "HTTP Port" textbox.
3. Input the port number for audio & video transmission in the "Data Port" textbox.

4.4.2 IP Address

1. Go to "Network Configuration" "IP Address".

There are two options for IP setup: obtain an IP address auto by DHCP protocol and use the
following IP address. You may choose one of options as required.
Use the following IP address: display the IP address, subnet mask, gateway and DNS of the
device.
PPPoE: User needs to input the user name and password for dial-up internet.
Firstly, log in IE clients and then enter user name and password of PPPoE, save the setting
and exit. Secondly, set up IP address change notice. Thirdly, connect with Modem. Then the
device will dial up internet automatically.
Press the "Save" button to save the settings.
18