Alarm Server; Network Configuration - Navaio NGC-7225V User Manual

Network Camera User Manual
Week schedule
You can set the alarm time from Monday to Sunday for alarm everyday in one week.
Add: Add the schedule for a special day.
Erase: Delete holiday schedule.
Day schedule
You can set alarm time for alarm in some time of special day, such as holiday.
1. Select a date at the "Date" pull down list, press "Add" button to add that date to the list box
on the right side and then move the scroll bar to set the schedule of that day.
2. Select a date in the list box on the right side, and press "Erase" to remove the schedule on
that day.
Press the "Save" button to save the settings.
Note: Holiday schedule is prior to Week schedule.

4.3.4 Alarm Server

Go to "Alarm configuration" "Alarm Server" interface as shown below.

You may input the alarm server address and port. When the alarm happens, the camera will
automatically transfer the alarm event to the alarm server. If the alarm server is not used, there
is no need for you to configure here.

4.4 Network Configuration

Network configuration includes nine submenus: Port, IP Address, Server Configuration, IP
Notify, DDNS Config, RTSP, UPNP, Mail configuration and FTP.
17