Volkswagen Transporter Instruction Manual page 55

Care and maintenance
2.0 litre engine
Cleaning or renewing the element
Th rough access flap inside vehicle:
• Open clips A.
• Detach all hose connections on top part
of cleaner.
• Pull back spring cl ips B on both car ­
buretors, pull side parts of cleaner off
carburetor con nections and take cleaner
top part off.
• Take element out of bottom part and
clean or ren ew it.
When installing , ensu re that the seals are lo­
cated properly on both carburetors. Connect
all hoses again.
In order to ensure sati sfactory operation of
the temperature and load sensitive intake air
preheating it is essential that the two hoses
under ri ght side of cleaner are connected
correctly. The red hose must be on the brass
connection C.
54
~