Volkswagen Transporter Instruction Manual page 16

Seats
Driver's cab
To move driver's seat*
The seat can only be moved when the handle
(1) at front of seat has been lifted or depre ­
ssed.
• Move seat as required and release
handle.
• Move seat further until catch engages in
nearest slot.
To adjust backrest rake of drivers seat
*
Take weight off backrest, press lever (2) on
right side of seat frame down and move
182-9241
backrest to desired position by moving upper
part of body and release lever.
To take driver's seat* out
• Slide seat right forward .
• Lift hook (3) against spring-loading, hold
it and slide seat past stop .
• Release hook and push seat forward out
of runn ers.
• The hook need not be lifted when put1ing
seat back as the seat can just be pushed
past the stop.
182-9251
- Front passenger"s seat also on ve hicles without partition.
Operation
Note
On vehicles without partition, the cab seats
are the same.
To remove or adjust passenger's seat
(Vehicles with partition)
Lift the seat at the front until the backrest be ­
comes unhooked from the retainer on the
partition . Then lift the seat out of the retaining
brackets. With the seat folded , insert it into
the required pOSition on the retainer brack ­
ets. When lowering the front of the seat , en ­
sure that the backrest hooks properly into the
retainer.
IS2 - 6 4 5 1
15