Volkswagen Transporter Instruction Manual page 12

Safety
Service installation of belts
All s8ats can be fitted with lap belts and the
outer places can be fitted with 3 point static or
inertia reel belts.
Belt anchorages
There are threaded holes in cab and rear
compartment for the belts.
The holes shown marked with rings are cov­
ered by the trim material. They must be ex­
posed when fitting the belts.
The plastic plugs must not be used to at­
tach the belts.
VAG workshops have all the necessary in ­
formation on the fitting of seat belts.
The installation of seat belts should therefore
preferably be done by a VAG workshop.
Vehicles with head restraints
To remove:
Pull upwards .
To install:
Push in until the head restraint comes to a
stop.
i "j