BIOS
3.11 Set Password
Using Password to set a password that will be used exclusively on the system.
To specify a password, highlight the type you want and press <Enter>.
The Enter Password: message prompts on the screen. Type the password,
up to eight characters in length, and press <Enter>. And the system confirms
your password by asking you to type it again. After setting a password, the
screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted
to enter the password. A message will confirm the password to be disabled.
Once the password is disabled, the system will boot, then you can enter BIOS
Setup freely.
- 57 -
- 57 -