Table of Contents
Advertisement
BIOS
IDE Primary HDDs
The onboard PCI IDE connectors provide Primary channel for connecting up
to four IDE hard disks or other IDE devices.
Each channel can support up to two hard disks; the first is the "Master" and
the second is the "Slave".
Press <Enter> to configure the hard disk. The selections include Auto,
Manual, and None. Select 'Manual' to define the drive information manually.
You will be asked to enter the following items.
Cylinder:
Head:
Precomp:
Landing Zone: Landing zone
Sector:
The Access Mode selections are as follows:
CHS
LBA
Large (for MS-DOS only)
Auto
Video
This field selects the type of video display card installed in your system.
You can choose the following video display cards:
EGA/VGA
CGA 40
CGA 80
MONO
Number of cylinders
Number of read/write heads
Write precompensation
Number of sectors
(HD < 528MB)
(HD > 528MB and supports Logical Block Addressing)
For EGA, VGA, SEGA, SVGA or PGA monitor
adapters. (default)
Power up in 40 column mode.
Power up in 80 column mode.
For Hercules or MDA adapters.
- 41 -
- 41 -
Advertisement
Table of Contents
