Availability Of Features; Reference To Operating Steps - Siemens optiPoint 150 S User Manual

Availability of Features

Your optiPoint 150 S can be operated on the following communication plat-
forms:
• HiPath 2000
• HiPath 3000
• HiPath 4000
• HiPath 5000
• HiPath 8000
• Broadsoft
• Sylantro
General feature availability cannot be guaranteed for the communication
platforms listed above. A number of the functions described here may not
be available or may be restricted in scope depending on the communica-
tion platform used. Contact the service personnel for information on the
features available on your communication platform or refer to the relevant
platform documentation.
As a rule, optiPoint 150 S can also operate at a DSL router in connection
with offerings from other VoIP providers. However, the feature scope de-
scribed in this operating manual cannot be guaranteed in this case by the
telephone's manufacturer. Even though optiPoint 150 S is fully compatible
with general SIP standards, some of the functions described here may not
be supported in view of the varying range of functions available from other
VoIP providers and the number different network configurations imple-
mented. An overview of RFC standards that are compatible with
optiPoint 150 S is provided at the back of this manual, see

Reference to Operating Steps

The following icons are used to indicate the various operating steps:
Operation on the optiPoint 150 S, see
Operation via the Web-based Management Tool, see
General Information
page 27.
page 34.
page 57.
9